EasyManua.ls Logo

ETI ThermaData WiFi - User Manual

ETI ThermaData WiFi
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ThermaData
®
WiFi
545-921/29.08.17
Electronic Temperature Instruments Ltd
Worthing · West Sussex · BN14 8HQ
tel: 01903 202151 · email: sales@etiltd.com
www.etiltd.com
Quick Start Guide
INSTRUMENT RECORD CARD
Serial No. _____________________________________________________
Calibrated by ________________________Date _____________________
0 °C
100 °C
This instrument has been checked or calibrated against reference instrument(s) calibrated
by a UKAS Accredited Calibration Laboratory.
PLEASE NOTE: Due to regular software updates, please visit the download page on
our website etiltd.com/downloads to ensure you have the latest version.
BATTERY CHANGING
You will need a flat-headed screwdriver (provided in box).
1. Place the instrument display-down on a solid surface.
2. Unscrew and remove the battery cover.
3. Remove batteries (top one first).
4. Fit new batteries, noting the polarities marked on the plastic.
5. Replace battery cover, then tighten battery screw.
6. Dispose of the old batteries appropriately.
If this is the first time the instrument has been used then it will need setting up in
ThermaData Studio. If it has previously been used then it will attempt to reconnect
to the WiFi and continue recording.
WARNING: IPA and other solvents may cause damage to the case and screen of
this instrument.

Other manuals for ETI ThermaData WiFi

Question and Answer IconNeed help?

Do you have a question about the ETI ThermaData WiFi and is the answer not in the manual?

Summary

Battery Changing

Instrument Record Card

Setting Up

Connecting Device to Internet via Mobile or Tablet

Steps to connect the ThermaData WiFi to the internet using a mobile or tablet.

Connecting Device to Internet via Laptop and USB Cable

Steps to connect the ThermaData WiFi to the internet using a laptop and USB cable.

Pairing Device to ThermaData Studio

Instructions for pairing the ThermaData WiFi device with ThermaData Studio software.

Read Only Access

Explanation of the 'Read Only' access mode for the instrument.

Full Access Mode

Explanation of the 'Full Access' mode for the instrument.

Company Contact Information

ETI ThermaData WiFi Specifications

General IconGeneral
CommunicationWiFi
ModelThermaData WiFi
Humidity Range0 to 100 %RH
Resolution0.1 °C/0.1 %RH
Battery LifeUp to 1 year
Operating Temperature-20 to +60 °C