ETL EF-14A User Manual

Wall Mounted Electric Fireplace
(With Remote Control)
Model#EF-14A(95056)
Please read all instructions carefully and
Retain for future reference
-1-
Getting Started
 Remove the appliance from the box.
 Remove any packaging from the product.
 Place the packaging inside the box and either store or dispose of safely.
Contents of Carton
 Heater
 Wall fixing bracket and screws
 Remote control
 one pc bracket and one pc bottom bracket
 8pcs 4x30mm back bracket; 4pcs 4*8mm to fix tempered glass
 2pcs 4*8mm and 1pcs 4x30mm to fix bottom bracket
 1 Instruction Manual
Helpful Advice before Fitting
 Please retain all packaging until you have checked and counted all the parts and the
contents of the hardware pack against the parts list.
 The hardware pack contains small items which should be kept away from young
children.
 We suggest that you open the hardware pack and place all the contents into a container,
therefore reducing the risk of losing any small pieces.
-2-
Installation (see Fig1 ~ Fig 7)

Do not connect the appliance until properly fixed to the wall and the instructions are
fully read.
 The minimum distances must be observed in the diagrams.

ETL EF-14A Specifications

General

Type	Electric Fireplace
Voltage	120V
Heating Area	Up to 400 sq. ft.
Remote Control	Yes
Adjustable Flame Brightness	Yes