ETM ETM9120-1 User Manual

UMTS/GSM/GPRS Terminal – ETM9140-1
GSM/GPRS Terminal – ETM9120-1
Features:
◩ 3G (HSPA+/UMTS) Connectivity – ETM9140-1 only
◩ 2G (GSM/GPRS) Connectivity
◩ Standard RS232 9DF serial port
◩ 5v to 35v power input on RJ12 connector
◩ 7 x I/O’s on RJ45 connector
◩ FME M antenna connector
◩ Sleep Mode for reduced power consumption
◩ User configurable via configuration tool
ETM9120 9140 Configuration Tool Userguide201406RV001
Configuration Tool Userguide

ETM ETM9120-1 Specifications

General

Brand	ETM
Model	ETM9120-1
Category	Modem
Language	English

Summary

Configuration Tool Userguide

Using the Configuration Tool

Installation and Setup

Details on copying, installing, and initial setup of the configuration tool.

Start-up and Programming

Steps to connect the modem, enter programming mode, and perform initial configuration.

Configuration File Management

Procedures for saving, reading, and writing configuration files to the modem.

Alarm and Messaging Configuration

SMS Alarm Setup

Configuring alarm recipients, user IDs, and message content for SMS alerts.

Incoming SMS Filtering and Limits

Restricting SMS access and limiting the number of SMS messages sent daily.

I/O and Power Settings

I/O Pin Definitions and Configuration

Details of RJ45 connector pin functions and configuration options for I/O ports.

Alarm Delay Settings

Configuring delays before alarms are activated or restored to prevent false triggers.

Power Input Monitoring and Alarms

Settings for monitoring power supply levels and configuring alarms for power failures.

System and Data Configuration

Module and Port Communication Settings

Matching baud rates and flow control for internal module and port communication.

Internet Connectivity and Data Transfer

Configuring internet settings, protocols, and timers for data transfer to servers.

Modem Operations and Interfaces

Terminal Interface and Commands

Using the terminal window to enter commands, program settings, and manage the modem.

Main Initialization and Low Power Mode

Configuring default operating modes, miscellaneous settings, and low power sleep mode.

Hardware Interfaces

Details on power supply, RJ45 I/O connector, RS232 serial port, and antenna connection.

SIM Card and Indicator Lights

Information on SIM card management, insertion, PIN, and status indicator LED functions.

Advanced Features and Calibration

Real Time Clock and Reference Date

Understanding how the modem uses clock and reference date for logging and alarms.

Analogue Input Calibration

Procedure for scaling and calibrating analogue inputs using ET commands and necessary equipment.

Querying and Programming via ET Commands

Methods for querying modem status and programming settings using ET commands.