EN 8
Grease filters
Removing the grease filters
Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Pull the grease filter towards you and tilt
it downwards at the front.
Odor filters
Installing odor filters
Odor filters (type A or type B) must always be used if the cooker hood
is not ducted.
1. Remove the grease filters.
2. Attach the odor filters in the motor housing; position the tabs and
attach the holder with the odor filter.
3. Replace the grease filters.
The functioning:
• More noise is produced when odor filters are used than when the
cooker hood is used with an exhaust vent.
• Odor filters function optimally at a lower motor speed.
Removing the odor filters
1. Remove the grease filters.
2. Push the mounting clip on the holder, tilt the holder down and
remove the odor filters (type A or type B) from the motor housing.
MAINTENANCE
To Next Page
