To Next PageTo Next PageWhat to do if my ETNA AFI8591ZT Dishwasher has a water intake malfunction?
If your ETNA Dishwasher isn't taking in water, first ensure that all water connections are properly secured and that the water intake tap is fully open. Also, check the filter for any clogs or debris. If the issue continues after these checks, it is advisable to contact the after-sales service.
What to do if my ETNA Dishwasher has a water pump-out malfunction?
If your ETNA Dishwasher isn't pumping water out, inspect the drain hose to ensure it is free from kinks or crushing. Also, check the siphon and filter for any blockages. If the problem persists after checking these components, contact the after-sales service.
What to do if my ETNA Dishwasher displays a safety level error?
If your ETNA Dishwasher displays a safety level issue, interrupt the current program and switch off the dishwasher. Then, switch it back on, reprogram it, and restart the washing cycle. Should the problem continue, it is advisable to contact the after-sales service for further assistance.
What to do if my ETNA AFI8591ZT has a water temperature monitoring malfunction?
If your ETNA Dishwasher is showing a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch it back on, program it again, and start the washing cycle. If the problem continues, contact the after-sales service.
Why is my ETNA AFI8591ZT Dishwasher not heating water properly?
If your ETNA Dishwasher isn't heating water correctly, repeat the washing program. If the problem persists after the repeat cycle, contact the after-sales service.
General| Brand | ETNA |
|---|---|
| Model | AFI8591ZT |
| Category | Dishwasher |
| Language | English |
