EN 16
OPERATION
Combi microwave functions
1. First touch the microwave key then use the functions knob to
activate the combi-microwave function.
The default microwave power will flash in the display.
2. Use the oven function knob to select a mode (see chapter ‘Oven
functions table’).
3. You can change the power, time and / or temperature of each mode
(if desired). For this, touch the clock / temperature setting key. The
power, time or temperature (setting) will flash. Use the selection dial
knob to set the desired power, time and / or temperature setting.
Touch the clock / temperature setting key again to confirm.
The power, time and temperature that can be set depends on the
mode that you have chosen.
4. Touch the start / pause key to start the cooking process.
When the cooking process is ready, a signal sounds. The fan
continues to operate for some time and then stops automatically.
If you do not touch the start / pause key, the combi microwave oven
switches itself Off automatically after 15 minutes.
To Next Page
