EasyManua.ls Logo

ETNA MO670Ti - Before Use; Before You Begin; Setting the Clock

ETNA MO670Ti
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 7
BEFORE USE
Before you begin
Open the door and remove the packaging material.
Do not use the microwave oven when it is damaged, but contact the manufacturer.
Remove the protection foil from the outside of the microwave oven.
Clean the inside of the oven and the accessories with a damp cloth. Do not use abrasive
cleaners or any strongly smelling detergents.
Setting the clock
When the oven is connected to the mains voltage, ‘00:00’ appears on
the display. Set the clock to the correct time.
1. Press the clock/temperature key.
The ‘hours’ display flashes.
2. Use the slider or the ‘- / +’ keys to set the correct hour.
3. Press the clock/temperature key.
The ‘minutes’ display flashes.
4. Use the slider or the ‘- / +’ keys to set the correct minutes.
5. Press the clock/temperature key to confirm the setting.
The clock stops flashing after you set the correct time.
The clock is now set.
Note
Press the clock/temperature key if you want to set the clock again in
the future. Set the clock as described above.

Related product manuals