EN 15
Removing the oven door
Removing the oven door
1. Fully open the oven door.
2. Put the safety pins in the holes in the hinges.
3. Hold the oven door with both hands and close it almost completely.
4. Lift the door a bit and pull the hinges out of the openings.
Note!
Do not remove the safety pins from the hinges! The hinges are spring-loaded. To be
able to reposition the oven door, the hinges must be under tension. If the safety pins
are removed, it is no longer possible to manually spring-load the hinges and place
the safety pins.
Positioning the oven door
1. Hold the oven door with both hands and slide the hinges in the openings.
The hinges click in place.
2. Slowly open the oven door fully.
3. Pull the safety pins out of the hinges.
4. Close the oven door.
CLEANING
To Next Page
