ETNA T111VRVSA - Operation

EN 3
OPERATION
Description
Igniting and setting
1. 0 setting
2. Low setting
3. High setting
4. zone indication
Each burner can be adjusted continuously between high and low heat.
• Press the control knob and turn it anticlockwise and light the burner
with a match.
• Keep the control knob fully pressed for at least 3 seconds between
high and low settings. The thermocouple safeguard is activated.
•
Burners with electric ignition (T111VRVSA):
• Press the control knob and turn it anticlockwise. The burner ignites.
• Keep the control knob fully pressed for at least 3 seconds between
high and low settings. The thermocouple safeguard is activated.
1. standard burner
2. pan support
3. standard burner
4. rapid burner
5. drip tray
6. simmer burner
7. control knob
6 754
1 2 3
1
4
3
2