EN 21
ERRORS
Problem
Soak program light flicker
ECO program light flicker
Soak and quick program
lights flicker
Potential causes
Water intake time is too long.
Water overflow.
Solution
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Some element of dishwasher leaks.
Note the code and alert the service
department.
Note the code and alert the service
department.
Error codes
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department. If all indicators
are flashing simultaneously: switch off the dishwasher immediately,
shut off the inlet tap and alert the service department.
To Next Page
Loading...
Need help?
General
