Why is my Eton EC 300.2A Car Amplifier not turning on?
Your Eton Car Amplifier might not be turning on because the voltage (B+ or REM) is not between 10.5 and 15.5 volts, or there's no voltage present. Inspect the alternator, battery, fuse, and wiring, and fix any issues. Another potential reason is improper grounding. Check the wiring and repair it if needed.
What to do if my Eton Car Amplifier does not turn on?
If your Eton Car Amplifier isn't turning on, it could be due to several reasons. First, ensure that the amplifier is properly grounded by checking the wiring and repairing as necessary. Also, verify that the B+ or REM voltage is between 10.5 and 15.5 volts. Check the alternator, battery, fuse, and wiring, and repair if needed.
How to fix Eton EC 300.2A that does not turn on?
To fix an Eton Car Amplifier that doesn't turn on, start by checking the B+ or REM voltage to ensure it's between 10.5 and 15.5 volts. Inspect the alternator, battery, fuse, and wiring, making any necessary repairs. Also, verify the amplifier is properly grounded by checking and repairing the wiring.
What to do if my Eton EC 300.2A has noise?
If your Eton Car Amplifier is producing noise, it might be because noise is radiating into the signal cables. Try re-routing the signal cables away from sources of high interference.
General| Brand | Eton |
|---|---|
| Model | EC 300.2A |
| Category | Car Amplifier |
| Language | English |
To Next Page