EasyManua.ls Logo

Eton ECC 300.2 - User Manual

Eton ECC 300.2
12 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EINBAU /BEDIENUNG
INSTALLATION / OPERATION
ECC 300.2
ECC 500.4
ECC 600.2
ECC 600.4
ECC 1200.1
ECC 300.2
ECC 500.4
ECC 600.2
ECC 600.4
ECC 1200.1
HIGH PERFORMANCE
AUDIO POWER AMPLIFIER
Achtung !
Bitte lesen Sie alle Warnungen in dieser Anleitung. Diese
Informationen sind eingerahmt hervorgehoben und eingefügt, um Sie
über mögliche persönliche Schäden oder Beschädigungen von
Sachwerten zu informieren.
Hörschäden
Anhaltendes, übermäßiges Ausgesetztsein von Lautstärken über
85 dB kann das Hörvermögen auf Dauer beeinträchtigen. ETON
Lautsprechersysteme sind imstande, auch Lautstärken über 85 dB zu
produzieren.
Lautstärke und Fahrerbewußtsein
Der Gebrauch von Musikanlagen kann das Hören von wichtigen
Verkehrsgeräuschen behindern und dadurch während der Fahrt
Gefahren auslösen.
ETON übernimmt keine Verantwortung für Gehörschäden,
körperliche Schäden oder Sachschäden, die aus dem Gebrauch oder
Mißbrauch seiner Produkte entstehen.
Attention !
Please read all warnings found in this manual. This information is
highlighted in frames and is included to inform you of the potential danger
of personal injury or damage to property.
Hearing Damage
Continuous, excessive exposure to sound pressure levels in
excess of 85 dB can cause a loss of hearing. ETON components are
capable of producing sound pressure levels greater than 85 dB.
Volume and Driver Awareness
Use of sound components can impair your ability to hear
necessary traffic sounds and may constitute a hazard while driving your
automobile.
ETON accepts no liability for hearing loss, bodily injury or property
damage as a result of use or misuse of this product.
2
Sicherheitshinweise / Safety Instructions

Questions and Answers

  • S
    Samantha RodriguezAug 11, 2025
    Why is my Eton Amplifier not turning on?
    • E
      Elizabeth BaileyAug 12, 2025
      If your Eton Amplifier isn't turning on, it might be due to the B+ or REM voltage not being within the range of 10.5 to 15.5 volts, or there might be no voltage present at all. Check the alternator, battery, fuse, and wiring to ensure they are functioning correctly, and repair as needed.
  • J
    Jessica OrrAug 21, 2025
    How to eliminate engine noise in Eton Amplifier?
    • E
      ericpattonAug 21, 2025
      If you're experiencing engine noise with your Eton Amplifier, it could be due to noise radiating into the signal cables. Try re-routing the signal cables away from high power cables to minimize interference.
  • W
    William Hardy Jr.Aug 31, 2025
    How to fix turn-on pop in Eton ECC 300.2?
    • M
      Matthew MuellerAug 31, 2025
      If you are experiencing a turn-on pop with your Eton Amplifier, it could be due to a voltage spike from the source unit entering the amplifier's input. Connect a relay turn-on module to the REM terminal.

Eton ECC 300.2 Specifications

General IconGeneral
BrandEton
ModelECC 300.2
CategoryAmplifier
LanguageEnglish

Related product manuals