SIDEKICK OWNER’S MANUAL
8
Voice or Siren
1. Press MENU.
2. Rotate TUNING dial up four steps.
3. ALERT – VOI or ALERT - SIR will be displayed.
4. Press WB.
5. SIREN will ash on the screen.
6. Rotate the TUNING dial up or down to indicate either
SIREN or VOICE.
7. Press MENU to enter setting.
8. If no buttons are pressed for 20 seconds, the unit will
go back to normal position.
Set S.A.M.E. location directly entering COUNTY/
PROVINCE code
1. The memory slot number, 01 – 25 will display on the
left side of the display.
2. Rotate the tuning dial up or down to select the
desired channel to set.
3. Press WB to enter
4. Use TUNING dial to select rst digit for your location.
5. Press WB to enter.
6. Use TUNING dial to select second digit for your
location.
7. Repeat until all 6 digits are correct.
8. Press MENU to enter.
9. ALL locations OPERATION:
10. Press MENU.
11. Rotate TUNING dial up three steps.
12. COUNTY – MUL, COUNTY –SIN or COUNTY –ALL will
be displayed.
13. Press WB.
14. Rotate TUNING knob until ALL ashes on the screen.
15. Press MENU to select.
16. COUNTY-ALL will be displayed .
17. If no buttons are pressed for 20 seconds, the unit
will go back to normal position.
To Next Page
Loading...
