To Next PageTo Next Page
Need help?Do you have a question about the Etross FWT-8848 and is the answer not in the manual?
Guides on connecting the terminal to a standard telephone for basic operation.
Explains how to connect the terminal to a billing device for call cost registration.
Details connecting the terminal to a Private Branch Exchange (PBX) for extended call capabilities.
Describes how to connect the terminal to a VoIP gateway for call termination.
Illustrates connecting the terminal to an alarm system as a PSTN backup.
Instructions for resetting the device to its original factory default configuration.
How to configure the time delay between dialing digits or calls.
Procedure for setting the device's internal clock and date.
Guide to adjust the audio output volume for the earphone.
Instructions for setting the microphone sensitivity for clear voice input.
How to configure the device to recognize or use a specific local area code.
Instructions for configuring IP addresses for network-related functions.
How to configure the display format for incoming caller identification.
Configuration for hiding the caller ID when making outgoing calls.
How to set up call barring for incoming telephone calls.
Optional configuration for FSK settings, requiring prior confirmation.
How to set the format for Caller ID transmission using DTMF signals.
Configuration options for the billing mode, including polarity and frequency.
Procedure to change the device's IMEI number, specific to M10 modules.
How to set prefixes for routing outgoing calls via the PSTN line.
Instructions on setting up PIN code checks and automatic locking for SIM cards.
Configuration options for enabling or disabling network lock features using passwords.
Step-by-step guide on how to initiate outgoing calls using the terminal.
Instructions on how to receive and answer incoming telephone calls.
General
