Etross FWT-8818 User Manual

1
FWT-8818 GSM Gateway
(FIXED WIRELESS TERMINAL)
USER’S MANUAL
1、DESCRIPTION
FWT-8818 GSM is a Fixed Wireless Terminal designed to provide better
wireless connectivity between POTS (plain old telephone set) and
existing GSM 900/1800Mhz network with high sensitivity to receive
signal and large transmitting power to expand extensively the effective
coverage of GSM service. It can be used not only in communication for
vehicles such as automobiles, trains, floating vehicles, etc., but also in

Etross FWT-8818 Specifications

General

Brand	Etross
Model	FWT-8818
Category	Gateway
Language	English

Summary

1. DESCRIPTION

2. LEDs DISPLAY INSTRUCTIONS

3. MAIN FUNCTION &FEATURES

4. SPECIFICATION

5. APPLICATION

6. INSTALLATION AND CONNECTION MODE

1.Antenna

Details the procedure for connecting the GSM antenna to the Fixed Wireless Terminal.

2.SIM Card

Explains how to open the cover and insert the SIM card into the device.

3.Connection to Telephone

Shows a diagram and describes the connection of the terminal to a telephone set.

4.Connection to PBX

Illustrates and describes how to connect the FWT-8818 GSM gateway to a PBX system.

5.Connection to Fixed line (PSTN)(Optional)

Explains the optional connection of the device to a fixed telephone line (PSTN).

7. FUNCTION SETTING

1. The right to call local No.

Explains how to set permissions for local calls using star codes and passwords.

2. The right to call DDD

Details how to set permissions for DDD (Direct Distance Dialing) calls.

3. The right to call IDD

Explains how to set permissions for IDD (International Direct Dialing) calls.

4. Install to call in

Describes the setting for incoming calls to the device.

5. Install to call IP

Explains how to configure IP call settings.

6. Modify 5 Digit Access to IP

Details how to change the 5-digit access code for IP calls.

7. Modify 6 digit password

Explains how to change the 6-digit password for various functions.

8. Install to have “zero” or not for the mobile phone of ex-cities

Describes the setting for handling "zero" prefix for mobile calls from specific cities.

9. Reversal polarity

Explains how to enable or disable reversal polarity detection.

10. Install to use local IP

Describes how to configure settings for using a local IP address.

11. Initialize System

Explains how to reset the system to its default settings.

8. NOTES: