SAFETY INSTRUCTIONS
ETZINGER AG Wirtschaftspark 44 / FL-9492 ESCHEN
Email: support@etzinger-ag.com
Phon +423 375 8383
www.etzinger-ag.com
etzMAX SAFETY INSTRUCTIONS
For further information about our products and/or instructions
(operating instructions), visit our website!
www.etzinger-ag.com
The device is built according to the latest technology. Nevertheless, there are remaining risks.
In order to avoid dangers and/or accidents, the safety instructions listed below must be observed and adhered to.
Keep the safety instructions in an easily accessible place so that anyone who operates the device can refer to them at any time.
Only operate the coffee grinder with alternating current and the correct voltage.
After unpacking, check whether the mains voltage (volts) and the device voltage match according to the label on the base of the grinder.
This coffee grinder may only be used for its intended purpose - the grinding of whole, roasted coffee beans.
Clean the coffee grinder and its housing with a dry or slightly damp cloth.
Never immerse the coffee grinder, its plug or the cable in water or other liquids.
Never operate the coffee grinder barefoot or with wet hands.
The coffee grinder and its power cord must be kept away from children under 8 years and animals.
Never operate the coffee grinder with a damaged cord or plug.
Regularly inspect your grinder and check for damages.
If the power cable is damaged, it must be replaced by the manufacturer, the service agent (Dealer) or a similarly qualified specialist to avoid a hazard.
Never leave the coffee grinder unattended during grinding/operation (START).
Children aged 8 and over and people with reduced physical, sensory and/or mental abilities and/or people with a lack of experience and knowledge in
handling this coffee grinder may only use it under the supervision of qualified personnel and with sufficient understanding of the possible dangers.
Cleaning the coffee grinder must not be carried out by children without supervision from qualified persons.
Maintenance and repairs may only be carried out by the manufacturer, the authorized dealer or an appropriately qualified specialist.
Always unplug the coffee grinder before assembly, disassembly, repairs and/or cleaning. To do this, pull the power plug out of the socket. Never pull the
power cord.
DISCLAIMER of Liability
Etzinger Engineering & Etzinger AG are not liable for injuries and damage resulting from non-observance of the safety instructions
and/or if the grinder is used other than for its intended purpose, the grinding of whole coffee beans. We assume no guarantee or liability
for damages and injuries caused by improper use, modifications and/or changes to the coffee grinder.
To Previous Page
Loading...