Need help?Do you have a question about the EUCHNER MGB-L B-EI Series and is the answer not in the manual?
Defines the scope and applicability of these operating instructions.
Identifies the intended audience for these operating instructions.
Explains the meaning of various symbols used throughout the document.
Lists additional documents that form the complete user information.
Describes safety function for MGB-L1/L2 with guard locking per EN ISO 14119.
Details control of guard locking via safety bit FO.L and its safety level.
Explains guard position monitoring for MGB-LO according to EN ISO 14119.
Explains the function of the MGB-LO.B-EI interlocking module with handle modules.
Details the function of MGB-L1/L2 locking modules with handle modules for guard locking.
Overview of the MGB-B-...-EI bus module, including its components and connections.
Details the components and features of the MGB-L.- locking/release module.
Describes the MGB-H-... handle module, its components and key features.
How to release guard locking manually using the auxiliary release function.
Describes the lockout mechanism for securing the bolt tongue with padlocks.
Details the function and requirements for the optional escape release.
Step-by-step guide for mounting the lens on the MGB system components.
Explains the LEDs on the MGB locking/release module and their status indications.
Details the LEDs on the MGB bus module and their meanings.
Describes the DIP switch configuration for the MGB system and its functions.
Pin assignment and connection details for the M12 variants of the MGB system.
Pin assignment and connection details for the 7/8" variants of the MGB system.
Guide for integrating the MGB system into Ethernet/IP and CIP Safety® networks.
Procedure for teach-in operation to assign handle modules to the locking module.
Overview of device-specific diagnostic information displayed via MOD LED.
Details on discrepancy errors and their rectification.
Addresses latching faults occurring after actuating the escape release.
Steps to follow for resetting errors in the MGB system.
Defines the scope and applicability of these operating instructions.
Identifies the intended audience for these operating instructions.
Explains the meaning of various symbols used throughout the document.
Lists additional documents that form the complete user information.
Describes safety function for MGB-L1/L2 with guard locking per EN ISO 14119.
Details control of guard locking via safety bit FO.L and its safety level.
Explains guard position monitoring for MGB-LO according to EN ISO 14119.
Explains the function of the MGB-LO.B-EI interlocking module with handle modules.
Details the function of MGB-L1/L2 locking modules with handle modules for guard locking.
Overview of the MGB-B-...-EI bus module, including its components and connections.
Details the components and features of the MGB-L.- locking/release module.
Describes the MGB-H-... handle module, its components and key features.
How to release guard locking manually using the auxiliary release function.
Describes the lockout mechanism for securing the bolt tongue with padlocks.
Details the function and requirements for the optional escape release.
Step-by-step guide for mounting the lens on the MGB system components.
Explains the LEDs on the MGB locking/release module and their status indications.
Details the LEDs on the MGB bus module and their meanings.
Describes the DIP switch configuration for the MGB system and its functions.
Pin assignment and connection details for the M12 variants of the MGB system.
Pin assignment and connection details for the 7/8" variants of the MGB system.
Guide for integrating the MGB system into Ethernet/IP and CIP Safety® networks.
Procedure for teach-in operation to assign handle modules to the locking module.
Overview of device-specific diagnostic information displayed via MOD LED.
Details on discrepancy errors and their rectification.
Addresses latching faults occurring after actuating the escape release.
Steps to follow for resetting errors in the MGB system.
General| Brand | EUCHNER |
|---|---|
| Model | MGB-L B-EI Series |
| Category | Network Hardware |
| Language | English |
To Next Page