08
EN EN
09
Mount the camera
The camera can be mounted both indoors and outdoors.
1. Turn the knob of the mounting bracket clockwise to loosen and
disassemble it.
2. Drill holes with a 15/64 inch (5.95mm) drill bit, then insert the
anchors into the holes; anchors are necessary for walls that are
made out of hard materials such as concrete, brick, or stucco.
Mount the camera
3. Firmly screw the base of the mounting bracket onto the wall. Fasten
the ball knob of the bracket to the base of the bracket.
4. Tighten eufyCam 2 Pro to the mounting bracket and adjust the
viewing angle by checking the live stream feed in the eufy Security
app.
Tips:
1. The HomeBase 2 pairs up to 16 cameras, you can repeat the steps mentioned
above to add more eufyCam 2 Pro cameras to meet different needs of use.
2. For troubleshooting, check Help on the eufy Security App. Refer to App page for
LED indicator status.
To Next Page
Loading...
