eufy Security T8300-C - Setting up the Camera and Monitor

03 English English 04
8
Monitor Antenna
9
Support stand
10
Micro USB charging port
11
LED indicator
• Red: charging
• White: Fully charged
12
Microphone
13
Speaker
Camera Features:
2
1
3
4
5
6
1
Standard camera lens
4
Speaker
2
Microphone
5
Micro USB port
3
Power LED Status indicator
6
Pairing button
SETTING UP THE CAMERA AND
MONITOR
Charge the Monitor
Fully charge the monitor before use. To charge:
1. Connect one end of the micro USB cable to the baby monitor,
and the other end to the power adapter.
2. Plug the adapter into a power outlet.
3. Press and hold the power button for 2 seconds to turn the
baby monitor on.
Charge the Camera
1. Connect one end of the micro USB cable to the baby
camera, and the other end to the power adapter (5V 2A)
2. Plug the adapter into a power outlet.