EasyManua.ls Logo

EUFY RoboVac 11S MAX - User Manual

EUFY RoboVac 11S MAX
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0201
Using Your RoboVac
Remove the sticker next
to the power switch, and
the foam blocks beside the
bumper before use.
T
- Install the Charging Base in a location that RoboVac
can easily access. It is recommended to place the
Charging Base against a wall, and on a hard-level
surface rather than on rugs or carpets.
- Always keep the Charging Base plugged in, otherwise
RoboVac will not automatically return to it.
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
a
b
c
d
e
f
Remove power cords and small objects from the floor that may entangle RoboVac. You can use the
supplied cable ties to organize your wires and power cords.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very
dark-colored rugs or high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to
malfunction.
Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac from getting
stuck. If necessary, place a physical barrier to block off the problem areas.
Keep RoboVac away from wet areas.
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if
possible.
Anti-drop sensors prevent RoboVac from tumbling down stairs and steep drops. They may work
less effectively if dirty or used on reflective/very dark-colored floors. It is recommended to place a
physical barrier to block off problem areas where the device may fall.
Place physical barriers in front of fireplaces and areas that may cause damage to RoboVac if
entered.
51005001557 V01
Quick Start Guide
- If you cannot remove the
objects surrounding the
Charging Base, check
whether RoboVac can return
to it without assistance
or not; if not, contact eufy
customer service for help.
- Always keep the Charging Base plugged in, otherwise RoboVac
will not automatically return.
- When the Charging Base is connected to AC power, the LED
indicator on the Charging Base is SOLID WHITE.
Fully charge RoboVac before use. The
LED indicator on RoboVac breathes
orange while charging, and is solid
blue when fully charged.
Refer to the Owner’s Manual to learn
how to select other cleaning modes
and to set cleaning schedules.
Question and Answer IconNeed help?

Do you have a question about the EUFY RoboVac 11S MAX and is the answer not in the manual?

EUFY RoboVac 11S MAX Specifications

General IconGeneral
BrandEUFY
ModelRoboVac 11S MAX
CategoryVacuum Cleaner
LanguageEnglish

Videos

How to Solve Eufy RoboVac 11S Max Solid Red Light Issue

Related product manuals