Need help?Do you have a question about the EURA DRIVES EM30 Series and is the answer not in the manual?
General| Cooling Method | Forced air cooling |
|---|---|
| Storage Temperature | -20°C to +60°C |
| Control Method | V/F control, Sensorless Vector Control |
| Braking Unit | Built-in or external (optional) |
| Communication Interfaces | Modbus RTU |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Overload, Short circuit |
| Operating Temperature | -10°C to +40°C |
| Humidity | 5% to 95% RH, non-condensing |
| Altitude | Up to 1000m without derating |
| Enclosure Rating | IP20 |
Crucial safety guidelines, precautions, examination, and maintenance procedures.
Guides for operating the keypad, setting parameters, and navigating function codes.
Introduces basic concepts, keypad operation, and motor parameter measurement.
Guides for basic operation including frequency setting, starting, and stopping.
Configuration for torque control and understanding parameter display options.
Guidelines for daily checks and periodic maintenance tasks.
Lists common inverter faults, their causes, and recommended solutions.
Summary of basic parameters, password, frequency, acceleration, and control modes.
Parameters for speed control modes, auxiliary functions, and protection settings.
Summary of motor parameter tuning and communication settings.
To Next Page
