Need help?Do you have a question about the Eurapo OMNIBUS 360 and is the answer not in the manual?
Description of console buttons for fan speed, mode, setpoint, and power.
Explanation of icons shown on the display for temperature, setpoint, and fan speed.
Explanation of various status icons indicating operational modes and functions.
Description of system alarms and warnings, including their codes and meanings.
Details on turning the controller on/off, setting seasons, temperature setpoints, and fan speeds.
Procedure to reset active alarms displayed on the controller.
List of specific error codes and their descriptions for system alarms.
List of specific warning codes and their descriptions for system status.
How to lock/unlock buttons and manage display backlight settings.
Accessing and viewing input/output status of the OPower card.
List and description of parameters for input/output status monitoring.
Guide to accessing and modifying controller parameters.
Configuration parameters for system type, modes, fan control, and inputs.
Parameters for temperature limits, offsets, setpoints, and display settings.
Explanation of DIP switch settings for terminating resistor, temperature units, and buzzer.
Guidelines for console placement and initial temperature calibration settings.
Instructions for connecting cables from a wall junction box to the console.
Steps for installing the console on the wall using different cable entry methods.
Table detailing power supply, absorbed power, protection grade, operating and storage temperatures, and weight.
Description and dimensions of the plastic bottom panel for wall mounting.
Guidelines for proper disposal of consumable parts and end-of-life equipment according to regulations.
Information on identifying and ordering spare parts and original components.
Details on the 24-month warranty covering factory defects, excluding installation errors.
General| Brand | Eurapo |
|---|---|
| Model | OMNIBUS 360 |
| Category | Controller |
| Language | English |
To Next Page