6
Assembly
CAUTION:Always unplug from electrical outlet before opening the dust cup.
NOTE: Dust cup filter must be used when operating the hand vac.
1. To open the dust cup, push release button and pull dust cup away from cleaner.
Verify that the dust cup filter is inside, then attach the dust cup to the hand
vac.
2. To attach the cleaning brush or crevice brush to the hand vac, push brush into
the suction hole, as shown.
3. To use the flexible hose, push the end of the hose into the suction hole, then
attach the desired brush to the other end of the flexible hose, as shown. Only
one end of the hose fits into the hand vac.
To use the carrying strap attach the strap to the connections on the hand vac.
Dust Cup
Filter
Carrying Strap
Connections.
To Next Page
Loading...
