Need help?Do you have a question about the Eureka MIGNON LIBRA MS and is the answer not in the manual?
General| Model | MIGNON LIBRA MS |
|---|---|
| Type | Espresso Grinder |
| Burr Type | Flat |
| Grind Settings | Stepless |
| Motor Power | 260 W |
| Hopper Capacity | 300 g |
| Material | Aluminium |
| Color Options | Black, White |
| Display | Digital |
Setting up the machine based on coffee blend and grinding degree before starting work.
Details on how the device display functions, including switching on and initial settings.
Warning regarding the selected dose key remaining enabled for 10 seconds after filter-holder positioning.
Warning that incorrect filter holder insertion prevents grinding and shows 'FH' on display.
Grinding should only start after inserting filter-holder or another container.
Warning: If weighing system doesn't detect gram change, grinder stops to prevent overheating.
Do not leave the filter-holder inserted on the filter-holder fork.
Disconnect appliance from power supply before cleaning/maintenance. Do not pull cord.
Maintenance and cleaning operations must be carried out by specialized authorized personnel.
Do not carry out makeshift repairs or use non-original spare parts.
All cleaning and sanitising operations must use products approved for food use.
Avoid grinding more than 160 g of coffee per activation for correct operation.
Grinders need replacement every 300 kg of coffee; maintenance requires specialized personnel.
Do not carry out makeshift or precarious repairs, nor use non-original spare parts.
To Next Page