Eureka NEU181A - Vacuum Cleaner Assembly; Step-by-Step Assembly Guide

www.eureka.com 5
Wrap cord onto upper
and lower cord hooks.
Align upper and lower
cord hooks and press
to snap in place.
Upper cord hook
should rotate freely.
Store accessories on back of
vacuum cleaner.
Click!
Slide handle into top of
vacuum cleaner. Push down
until it clicks.
Insert bent end of hose into
opening at back of dust cup.
Twist hose clockwise to lock.
Push loose end of
hose securely onto
hose inlet.
Vacuum cleaner with dust
cup.
Loop hose over hose
retainer.
Store turbo brush on
front of handle. Align
brush opening with
slot and push to snap
tool into clip.