What to do if my Eureka Vacuum Cleaner is not working?
If your Eureka Vacuum Cleaner isn't working, first ensure the power plug is securely inserted into the outlet. Also, check the circuit breaker. If the vacuum still doesn't run, consult the section on Thermal cut off on P14.
Why Eureka NEU800 does not pick up dirt or has weak suction?
If your Eureka Vacuum Cleaner isn't picking up dirt or the suction is weak: * Check if the air inlet on the floor nozzle or the hose is clogged, and remove any blockages. See page 13. * Verify that the brushroll and brushroll lock tab are correctly installed. See page 12. * Clean and/or change the filters regularly. See pages 10 and 11.
How to fix a Eureka NEU800 Vacuum Cleaner brushroll that doesn’t rotate?
If the brushroll on your Eureka Vacuum Cleaner isn’t rotating or the mode light is blinking: 1. Ensure the vacuum is reclined, as the brushroll spins when reclined. Step on the floor nozzle and recline the vacuum for vacuuming floors. See page 7. 2. Remove the brushroll, clear any debris, and reinstall it. See page 12.
What to do if the canister on my Eureka NEU800 Vacuum Cleaner cannot slide up or down?
When preparing to slide the canister upwards or downwards on your Eureka Vacuum Cleaner, first press the 'Slide up/down yellow trigger button', and then slide the unit upwards or downwards, respectively.
General| Model | NEU800 Series |
|---|---|
| Category | Vacuum Cleaner |
| Power Source | Battery |
| Voltage | 25.2V |
| Battery Type | Lithium-Ion |
| Runtime | Up to 40 minutes |
| Type | Stick Vacuum |
| Charge Time | 4 hours |
| Filtration | HEPA |
| Filter Type | HEPA filter |
| Cord Length | Cordless |
| Accessories | Crevice tool |
| Included Tools | Crevice tool |
| Features | LED headlights, swivel steering, lightweight design |
| Warranty | 2 years limited |
To Next Page