Euro-Pro Shark 803XC User Manual (English)

Questions and Answers:

A
ashley90Aug 16, 2025
Why does the upper thread keep breaking on my Euro-Pro Shark 803XC Sewing Machine?
- K
  Kristopher CooperAug 16, 2025
  If the upper thread of your Euro-Pro Sewing Machine is breaking, several factors could be at play. First, ensure the machine is correctly threaded. If the tension is too tight, reduce it. For thread too thick for the needle, select a larger needle. Also, make sure the needle is correctly inserted with the flat side properly oriented. Check if the thread is wound around the spool holder pin, and if so, remove the spool and rewind the thread. Lastly, a damaged needle should be replaced.
D
drodriguezAug 19, 2025
What to do if my Euro-Pro Shark 803XC Sewing Machine is skipping stitches?
- C
  christopher08Aug 19, 2025
  If your Euro-Pro Sewing Machine is skipping stitches, it might be due to a few reasons. First, make sure the needle is inserted correctly, with the flat side towards the back. A damaged needle should be replaced. Ensure you're using the correct size and type of needle for your thread and fabric. Also, check that the presser foot is properly attached.
J
Jesse WilliamsAug 22, 2025
Why is the lower thread breaking on my Euro-Pro Shark 803XC Sewing Machine?
- B
  Bryan MontgomeryAug 22, 2025
  If the lower thread is breaking on your Euro-Pro Sewing Machine, start by checking if the bobbin case is correctly inserted; remove and reinsert it, ensuring the thread pulls easily. Also, verify that the bobbin case is threaded correctly. If the lower thread tension is too tight, loosen it. Clean any lint from the bobbin case. Finally, if the bobbin is damaged and doesn’t turn smoothly, replace it.
D
Denise McneilAug 26, 2025
Why is the needle breaking on my Euro-Pro Shark 803XC Sewing Machine?
- K
  Kristy RamosAug 26, 2025
  If the needle of your Euro-Pro Sewing Machine breaks, it could be due to several reasons. A damaged needle should be replaced. Ensure the needle is correctly installed with the flat side towards the back. Tighten the needle clamp screw. If the upper thread tension is too tight, loosen it. Use the correct needle size for the fabric. Always turn the hand wheel to lift the needle before turning the pattern selector dial. Also, ensure the correct presser foot is attached for the selected stitch pattern.
J
jturnerAug 28, 2025
How to fix seams that gather or pucker on my Euro-Pro Shark 803XC Sewing Machine?
- J
  Jenna SharpAug 28, 2025
  If your Euro-Pro Sewing Machine's seams gather or pucker, the thread tension might be too tight, so loosen it. Also, the machine might not be threaded correctly, so rethread it. Finally, the stitch length might be incorrect, so readjust it.
B
Brandon HarveyAug 31, 2025
Why does my Euro-Pro Shark 803XC make uneven stitches?
- M
  Mr. Aaron JohnsonAug 31, 2025
  If your Euro-Pro Sewing Machine is making uneven stitches or feeding unevenly, the issue could stem from several causes. Try using a better quality thread. Ensure the bobbin case is correctly rethreaded and reinserted. Avoid pulling the fabric while sewing; let the machine feed it naturally.
C
cgomezSep 3, 2025
How to stop my Euro-Pro Shark 803XC Sewing Machine from forming loops underneath the fabric?
- C
  Cynthia ChungSep 3, 2025
  If your Euro-Pro Sewing Machine is forming loops underneath the fabric, it could be due to a few reasons. First, make sure the machine is threaded correctly. Also, check the threading of the bobbin case. Ensure the needle size suits the fabric and the thread. Finally, correct the thread tension.
A
Adam MillerSep 6, 2025
Why is my Euro-Pro Shark 803XC so noisy?
- W
  Whitney BarnesSep 6, 2025
  If your Euro-Pro Sewing Machine is excessively noisy, it may need lubrication. Additionally, fluff or old oil might have accumulated on the hook or needle bar, requiring cleaning. Ensure you are using good quality sewing machine oil. A damaged needle can also cause noise, so replace it if necessary.
M
Mr. Timothy KempSep 9, 2025
What to do if my Euro-Pro Shark 803XC Sewing Machine jams or does not work?
- S
  Sherri WyattSep 9, 2025
  If your Euro-Pro Sewing Machine jams or doesn't work, check for thread caught in the hook race; remove the upper thread and bobbin case, then turn the hand wheel back and forth to remove any thread remains, and lubricate the machine. Ensure the machine is plugged into a power source. Also, verify that the clutch knob is engaged and not disengaged for bobbin winding.
M
Marvin BurtonSep 12, 2025
Why aren’t the buttonhole stitches balanced on my Euro-Pro Sewing Machine?
- C
  Carrie ElliottSep 12, 2025
  If the buttonhole stitches on your Euro-Pro Sewing Machine are not balanced, the stitch length may not be suitable for the fabric; adjust it accordingly. Avoid pulling or holding back the fabric while guiding it.

Euro-Pro Shark 803XC Specifications

General

Brand	Euro-Pro
Model	Shark 803XC
Category	Sewing Machine
Language	English

Summary

Important Safety Instructions

Electric Shock Hazards

DANGER warnings and precautions to reduce electric shock risk.

Burn, Fire, and Injury Hazards

WARNING warnings and precautions to reduce burn, fire, and injury risks.

Save Instructions

Instruction to retain safety guidelines for future reference.

Accessories

Standard and Optional Accessories

Lists of included and optional accessories for the sewing machine.

Preparing to Sew

Connecting to Power Source

Instructions for safely connecting the sewing machine to an electrical outlet.

Preparing to Sew

Changing the Light Bulb

Step-by-step guide for replacing the sewing machine's light bulb.

Preparing to Sew

Using the Sewing Table and Extension

How to attach, remove, and use the sewing table and extension.

Preparing to Sew

Attaching and Removing the Presser Foot

Procedures for attaching and detaching presser feet.

Preparing to Sew

Changing the Needle

Guide on how to replace the sewing machine needle correctly.

Preparing to Sew

Needle, Fabric, and Thread Selection

Guide for matching needles, fabrics, and threads for optimal sewing.

Preparing to Sew

Setting Spool Pins and Winding Bobbins

Instructions for setting spool pins and winding bobbins.

Preparing to Sew

Threading and Handling the Bobbin Case

Steps for threading and inserting/removing the bobbin case.

Preparing to Sew

Threading the Upper Thread

Detailed instructions for threading the upper thread through the machine.

Preparing to Sew

Bringing Up the Lower Thread

How to bring the bobbin thread up to the needle area.

Preparing to Sew

Thread Tension Adjustment

Guide for checking and adjusting upper and lower thread tensions.

Preparing to Sew

Seam Guide Line and Feed Dog Control

Information on seam guides and controlling feed dogs.

Basic Sewing

Selecting Stitch Patterns and Length

How to select stitch patterns and adjust stitch length.

Basic Sewing

Straight, Reverse, and Directional Sewing

Techniques for straight, reverse, and changing sewing directions.

Basic Sewing

Zigzag Sewing and Thread Cutting

Instructions for zigzag sewing and cutting threads.

Utility Sewing

Overcasting and Basting Stitches

How to perform overcasting and basting stitches.

Utility Sewing

Elastic, Tricot, and Joining Stitches

Instructions for sewing elastic, tricot, and joining fabrics.

Utility Sewing

Sewing Buttons

Guide for sewing buttons onto garments, including shank buttons.

Utility Sewing

Sewing Buttonholes

Steps for preparing and sewing buttonholes.

Utility Sewing

Zipper Application

Instructions for inserting zippers into garments.

Utility Sewing

Using the Hemmer Foot

How to use the hemmer foot for neat hems on light fabrics.

Utility Sewing

Using the Quilting Foot

Instructions for using the quilting foot for quilting.

Decorative Sewing

Shell Tuck Stitch

How to sew a decorative shell tuck stitch on lightweight fabrics.

Decorative Sewing

Decorative Satin Stitch Patterns

Guide for using satin stitches for decorative patterns.

Decorative Sewing

Smocking Stitch

Instructions for creating a smocking stitch effect.

Decorative Sewing

Rampart Stitch

How to use the rampart stitch for reinforcing seams.

Using Optional Accessories

Satin Stitch Foot

Using the satin stitch foot for decorative stitching.

Using Optional Accessories

Blind Hem Foot

Instructions for using the blind hem foot for invisible hems.

Using Optional Accessories

Button Sewing Foot

How to use the button sewing foot to attach buttons.

Using Optional Accessories

Cording Foot

Using the cording foot for decorative cord effects.

Using Optional Accessories

Overcasting Foot

Instructions for using the overcasting foot for finishing edges.

Using Optional Accessories

Gathering Foot

How to use the gathering foot to create ruffles.

Using Optional Accessories

Darning/Embroidery Foot

Using the darning/embroidery foot for free-motion sewing.

Maintenance

Hook Race Maintenance

Steps for dismantling, oiling, and assembling the hook race.

Maintenance

Machine Oiling and Feed Dog Cleaning

Guide for oiling the machine and cleaning feed dogs.

Troubleshooting Guide

Common Thread and Needle Issues

Solutions for upper/lower thread breaks, skipped stitches, and needle breaks.

Troubleshooting Guide

Sewing Quality and Machine Operation Issues

Troubleshooting for puckering, loops, uneven stitches, noise, jams, and unbalanced buttonholes.

Warranty and Registration

25 Year Limited Warranty

Details of the product's limited warranty coverage and terms.

Ownership Registration Card

Form for registering product ownership for warranty purposes.

Related product manuals

Euro-Pro Shark 7133

107 pages

Euro-Pro Shark 101-548

51 pages

Euro-Pro 7130 S

100 pages

Euro-Pro Select 762XH

Euro-Pro Dressmaker 998B

14 pages

Euro-Pro Shark 803XC User Manual

Table of Contents

Questions and Answers:

Euro-Pro Shark 803XC Specifications

Summary

Important Safety Instructions

Electric Shock Hazards

Burn, Fire, and Injury Hazards

Save Instructions

Accessories

Standard and Optional Accessories

Preparing to Sew

Connecting to Power Source

Preparing to Sew

Changing the Light Bulb

Preparing to Sew

Using the Sewing Table and Extension

Preparing to Sew

Attaching and Removing the Presser Foot

Preparing to Sew

Changing the Needle

Preparing to Sew

Needle, Fabric, and Thread Selection

Preparing to Sew

Setting Spool Pins and Winding Bobbins

Preparing to Sew

Threading and Handling the Bobbin Case

Preparing to Sew

Threading the Upper Thread

Preparing to Sew

Bringing Up the Lower Thread

Preparing to Sew

Thread Tension Adjustment

Preparing to Sew

Seam Guide Line and Feed Dog Control

Basic Sewing

Selecting Stitch Patterns and Length

Basic Sewing

Straight, Reverse, and Directional Sewing

Basic Sewing

Zigzag Sewing and Thread Cutting

Utility Sewing

Overcasting and Basting Stitches

Utility Sewing

Elastic, Tricot, and Joining Stitches

Utility Sewing

Sewing Buttons

Utility Sewing

Sewing Buttonholes

Utility Sewing

Zipper Application

Utility Sewing

Using the Hemmer Foot

Utility Sewing

Using the Quilting Foot

Decorative Sewing

Shell Tuck Stitch

Decorative Sewing

Decorative Satin Stitch Patterns

Decorative Sewing

Smocking Stitch

Decorative Sewing

Rampart Stitch

Using Optional Accessories

Satin Stitch Foot

Using Optional Accessories

Blind Hem Foot

Using Optional Accessories

Button Sewing Foot

Using Optional Accessories

Cording Foot

Using Optional Accessories

Overcasting Foot

Using Optional Accessories

Gathering Foot

Using Optional Accessories

Darning/Embroidery Foot

Maintenance

Hook Race Maintenance

Maintenance