To Next Page
N
Nicole GreenJul 30, 2025
Why Euro-Pro VPW49HA Pressure Washer will not start when the on/off switch is in the "on" position?
- LlaurajohnsonJul 30, 2025
If your Euro-Pro Pressure Washer doesn't start when switched on, here's what to check: * Ensure the power cord is properly plugged in. * Verify the electrical socket isn't faulty and the breaker hasn't tripped. Check the plug, socket, fuses, and breaker. * Confirm the voltage is adequate for the pressure washer. * The GFCI may have tripped. Try resetting it or using another electrical outlet.
General
