What to do if my EURO EG90GFSX Cookers appliance is not working?
If your EURO Cookers appliance isn't working, ensure the gas cock is open, the plug is properly inserted, and the control knobs are correctly set for cooking. Refer to the handbook for the correct operations. Also, check the electrical system safety switches (RCD). If the system has failed, contact an electrician.
Why is the oven light not working on my EURO EG90GFSX Cookers?
If the oven light in your EURO Cookers isn't working, first ensure the lamp is firmly screwed in place. If it still doesn't work, purchase a high-temperature lamp from our Service Centre and install it following the instructions.
What to do if my EURO EG90GFSX is not working?
If your EURO Cooker isn't working, start by ensuring the gas cock is open and that the appliance is properly plugged in. Verify that the control knobs are correctly set for cooking, referring to the handbook for guidance. Check the electrical system's safety switches. If these steps don't resolve the issue, it's recommended to call a qualified electrician.
Why the oven light does not switch on in my EURO EG90GFSX Cookers?
If the oven light in your EURO Cookers isn't turning on, first ensure the lamp is firmly screwed in place. If it still doesn't work, purchase a high-temperature lamp from a service center and install it following the instructions in the 'Replacing the Oven Lamp' section.
General| Fuel Type | Gas |
|---|---|
| Oven Type | Gas |
| Width | 90 cm |
| Product Type | Freestanding Cooker |
| Number of Gas Burners | 5 |
| Ignition Type | Automatic |
| Color | Stainless Steel |
| Burner Types | Wok, Semi-rapid, Auxiliary |
| Gas Type | Natural Gas/LPG |
| Dimensions (W x D x H) | 900 x 600 x 900 mm |
General safety advice, installation, usage, maintenance, and disposal guidelines.
Overview of cooker features, accessories, control panel, and specific functions.
Detailed guidance on operating the hob, oven, and specific cooking modes.
Common problems and their solutions for appliance operation.
Procedures for safe installation, gas/electrical connections, and stabilization.
Specifications, burner data, electrical components, and wiring diagrams.
To Next Page
