Need help?Do you have a question about the Euroboor ECO.100/4 and is the answer not in the manual?
General| Max Drill Diameter | 100 mm |
|---|---|
| Stroke Length | 260 mm |
| Voltage | 110-120 V / 220-240 V |
| Annular Cutter Capacity | 100 mm |
| Tapping | M30 |
Provides essential safety instructions and recommendations for the proper and safe operation of the drilling machine.
Details various Euroboor hole cutters, their specifications, and suitability for different steel types and applications.
Instructions for installing and removing the Morse Taper assembly from the machine's spindle.
Steps for connecting the hole cutter to the spindle or morse conus, including pilot pin insertion and securing.
Guidance on attaching drill chucks using adaptors or directly to the motor unit for various drilling tasks.
Information on the magnetic base requirements, factors affecting holding force, and LED indicator for attachment strength.
Details the switches and indicators on the control panel for operating the magnet and motor.
Explains the variable speed and torque controls, and the motor's electronic temperature protection system.
Instructions for using the 4-speed manual gearbox and electronic speed adjustment for optimal drilling performance.
A 10-step guide for executing drilling tasks, covering pilot pin use, magnet engagement, motor operation, and cutter handling.
Guide for performing tapping operations, including tool selection, speed settings, and manual control during thread cutting.
To Next Page
