Need help?Do you have a question about the Euroboor ECO.32 and is the answer not in the manual?
General| Max Drill Diameter in Steel | 32 mm |
|---|---|
| Max Drill Depth | 50 mm |
| Magnet Force | 1500 kg |
| Cutter Capacity | 12 - 32 mm |
| Twist Drill Capacity | 1 - 13 mm |
| Voltage | 220-240 V |
| Chuck capacity | 13 mm |
Maintain a clean area, avoid hazardous atmospheres, and keep bystanders clear.
Ensure correct plugs, avoid grounded surfaces, protect from moisture, and handle cords properly.
Remain alert, dress appropriately, prevent accidental starts, and use safety gear.
Provides measured sound power and pressure levels, and vibration acceleration.
Defines the machine's purpose and provides initial setup steps for safe operation.
Covers preparation, mounting the drill guard, fitting lubrication, and safety chain attachment.
Details magnetic base requirements, LED indicator function, and proper attachment.
Steps to activate the magnet and verify sufficient magnetic force using the LED indicator.
Detailed 10-step guide for achieving the best drilling results with the machine.
To Next Page
