Fitting shelf brackets (read carefully if you intend to modify your cabinet's shelf positions)
STORAGE SHELF
To move a storage shelf, first remove all bottles, then move the shelf brackets and make sure to fit them back into slots as shown below:
SLIDING SHELF
To move a sliding shelf, first remove all bottles, then remove the sliding shelf by sliding it towards you while lifting the front part. Remove the
sliding guides from the walls, while making sure not to mix up the right and left guides. Then refit them as shown below:
Then refit the sliding shelf as shown below:
Fitting the rear part of the guide
Fitting the front part of the guide
To Next Page
Loading...
Need help?
General
