Need help?Do you have a question about the EuroLite LED BAR-6 and is the answer not in the manual?
General| Type | LED Bar |
|---|---|
| Number of LEDs | 6 |
| Power Consumption | 30W |
| LED Color | RGB |
| Power Supply | 100-240V AC, 50/60Hz |
| Input Voltage | 100-240V AC |
| IP Rating | IP20 |
| Control Protocol | DMX |
Provides essential safety warnings for device operation, emphasizing careful handling and electrical shock risks.
Warns about direct viewing of the light source and the risks to sensitive individuals, including epileptic shock.
Lists the primary capabilities and specifications of the LED bars, including DMX control and LED types.
Provides a visual identification of the device and its main components with labeled diagrams.
Details critical safety requirements and procedures for overhead mounting, including load limits and safety bonds.
Warns about fire risks and specifies minimum distances from flammable materials during installation.
Explains synchronized control of multiple devices using a master-slave configuration.
Guides the user on how to safely connect the device to the power supply network.
Describes how to operate the device without a DMX controller using its built-in functions.
Details the various settings and programs accessible via the device's control board interface.
Explains how to set the DMX starting address for individual device control in a chain.
Covers the process of operating the device using a DMX controller after addressing.
Details the functions assigned to different channels across various DMX modes (2, 4, 5, 6, 9 channel).
Explains the color presets available in 5-channel mode, Channel 2, and Stand-Alone Menu.
Provides step-by-step instructions for safely replacing a blown fuse with the correct type.
Lists the detailed technical data, including power, dimensions, weight, and operating parameters.
To Next Page