To Next PageTo Next Page
Need help?Do you have a question about the EuroLite LED Mini D-20 Hybrid Beam Effect and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| Power Consumption | 30 W |
| Beam Angle | 15° |
| Weight | 2.1 kg |
| DMX channels | 9/11/13 |
| DMX connector | 3-pin XLR |
| Power supply | 100-240 V AC, 50/60 Hz |
| Dimensions | 175 x 165 x 245 mm |
| Color Mixing | RGB |
| Control Protocol | DMX512 |
| LED type | RGB |
| Control | DMX, sound-to-light, auto mode |
| Voltage | 100-240V AC |
Essential safety precautions for operation, installation, and handling the device.
Specifies operating environment, temperature limits, humidity, and installation location requirements.
Lists the main functionalities and technical aspects of the LED Mini D-20 Hybrid Beam Effect.
Identifies and labels the physical components and connection ports of the device.
Details safety procedures, load capacity, and secondary attachments for overhead mounting.
Explains mains connection, power supply cable, and device-to-device power linking.
Describes XLR connection pinout, DMX cable requirements, and serial chaining.
Explains how to synchronize multiple devices using master/slave configuration.
Details DMX channel modes (1CH, 4CH) and protocol values for controlling functions.
Explains navigation and settings using the device's control panel and display.
Guides on using the infrared remote control for various modes and functions.
Step-by-step procedure for safely replacing the device's fuse.
Lists power, consumption, DMX channels, connections, environmental limits, and dimensions.
