Need help?Do you have a question about the EUROM INDEPEND 800 and is the answer not in the manual?
General| Brand | EUROM |
|---|---|
| Model | INDEPEND 800 |
| Category | Portable Generator |
| Language | English |
Explains safety and operation symbols used in the manual for generator usage and potential hazards.
Provides critical warnings about potential dangers and accidents if instructions are not followed.
Defines user obligations for safe operation, maintenance, and awareness of generator hazards.
Highlights carbon monoxide dangers from exhaust fumes and specifies safe operating locations.
Details safe practices for handling flammable petrol, refueling, and preventing fires.
Covers safe device handling, fuel type, and hazards from hot engine components.
Details risks of electrocution from voltage, damp conditions, and wet hands.
Provides instructions for correctly earthing the generator to ensure electrical safety.
Stresses the need to check the generator and connected electrical equipment for damage before operation.
Prohibits connecting to the main grid and advises against parallel generator connections.
Covers circuit breaker requirements and specifications for generator connection cables.
Provides recommendations and warnings for using extension cables with the generator.
Instructs on safe placement, keeping flammable materials away, and exhaust heat.
Details safe fuel handling, refueling, and proper fire extinguisher use.
Identifies and labels all major components and controls of the generator unit.
Explains the automatic engine shutdown mechanism based on low oil levels.
Details the operation of the engine switch and the economy switch for load management.
Covers the 12V protection system and the functions of the tank venting button and fuel cock.
Details how to check fuel levels, add petrol safely, and adhere to refueling warnings.
Guides on checking engine oil, topping up, and identifying when oil replacement is needed.
Covers initial checks like not connecting equipment and setting the economy and engine switches.
Outlines the steps for opening the fuel cock and the tank's venting button before starting.
Details setting the choke lever and priming the fuel system for engine start.
Explains the correct pull-start technique, including safety precautions to prevent injury.
Covers allowing the engine to warm up and adjusting the choke lever to the run position.
Details connecting AC equipment, checking indicator lights, and using the Economy switch.
Explains the overload indicator, automatic shutdown, and steps to take if overload occurs.
Provides a detailed step-by-step guide for charging 12V batteries using the generator.
Details the correct sequence for shutting down the generator and its components.
Lists components, required actions, and maintenance intervals (hours/months) for optimal operation.
Details the process for changing engine oil, including preparation, draining, and refilling with recommended oil.
Provides instructions for cleaning, drying, oiling, and replacing the air filter for engine protection.
Details how to clean, inspect, and adjust the spark plug gap for proper engine ignition.
Guides on servicing the fuel filter, including cleaning or replacement, and securing the fuel cap.
Details the steps for removing, cleaning carbon deposits from, and reinstalling the spark arrester.
Identifies causes for the engine not starting, covering fuel supply, oil, and ignition system faults.
Guides on troubleshooting no electricity output by checking AC and DC safety facility settings.
Details the process of draining the fuel from the tank and carburetor before storing the generator.
Outlines steps to prepare the engine for storage, including adding oil and turning it over.
Detailed wiring diagram for the Independ 800 and 1200 generator models.
To Next Page
