50
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
Choose a suitable location (wall-mounted or free-standing) for the
device to take into account all the warnings mentioned earlier in this
manual.
Note: For free-standing use: Only use the device when the feet are
mounted. Use of the device without feet is particularly flammable.
Wall mount
A. Suspension frame with suspension pegs
B. Wall spacer
Hang the heater on a sturdy, smooth, vertical wall made from heat-resistant
material.
Determine where you will hang the suspension frame; the frame should be
mounted horizontally on the wall. Position the suspension frame so that the
minimal distances described in the picture above are guaranteed when
positioning the heating
panel. Make sure to hang
the suspension frame
upright (see label “This
side up” on the
suspension frame).
Now mark the 4 places
where the holes need to
be drilled with the correct
distance between them
and completely spirit-
level.
To Next Page
Loading...
Need help?
General