Need help?Do you have a question about the Euromag MUT1222 and is the answer not in the manual?
General| Type | Electromagnetic Flow Meter |
|---|---|
| Housing material | Aluminum, Stainless Steel |
| Protection class | IP67, IP68 |
| Accuracy | ±0.5% of reading |
| Ambient temperature | -20°C to +60°C |
| Output signal | 4-20 mA, Pulse, Frequency |
| Display | LCD |
| Dimensions | Varies with size |
| Weight | Varies with size |
| Lining material | PTFE, Polyurethane |
| Electrode material | Stainless Steel, Titanium, Tantalum, Hastelloy |
| Process connection | Flange |
| Flange standard | ANSI, JIS |
| Fluid temperature | -20°C to +180°C |
| Communication | HART, Modbus |
| Power Supply | 24 VDC |
Table outlining typical applications for various EUROMAG sensor models.
Explanation of the electromagnetic flow measurement principle and formula.
Key requirements for installation, including avoiding vibrations, magnetic fields, and ensuring pipe is full.
Optimal positioning and general guidelines for correct flowmeter installation in the pipeline.
General guidelines for sensor grounding, cable specs, and importance of electrical continuity.
Electrical connection details for sensors in a separate (remote) configuration.
Wiring diagrams for single and double-shielded electrode cable connections.
Essential requirements for installing insertion probes, including probe alignment and pipe fullness.
To Next Page
