Need help?Do you have a question about the Euromag MUT2200EL and is the answer not in the manual?
General| Type | Electromagnetic flow meter |
|---|---|
| Accuracy | ±0.2% of measured value ± 1 mm/s |
| Housing material | Carbon Steel, Stainless Steel |
| Protection class | IP67, IP68 |
| Output signal | 4-20 mA, Pulse, Frequency |
| Display | LCD |
| Lining material | PTFE, Polyurethane |
| Electrode material | Stainless steel, Titanium |
| Communication | HART, Modbus |
| Measurement Range | 0.1 m/s to 10 m/s |
| Power Supply | 24 VDC |
| Dimensions | Dependent on nominal diameter |
| Weight | Dependent on nominal diameter |
Sign indicating risk of electric shock for qualified personnel.
Symbol for vital information and points to observe.
Symbol indicating information of particular importance.
Statement on loads and external factors not accounted for in design.
Details on the sensor's identification plate.
Table showing typical applications for different sensor models.
How the electromagnetic sensor works.
Overview of sensor types (flanged, wafer, insertion).
Key conditions like pipe fullness and avoiding vibrations.
Positioning and guidelines for optimal working.
Ensuring accurate measurement by managing air.
Grounding requirements and benefits for measurement.
Grounding specifics for plastic pipe installations.
Wiring diagrams for separate sensors.
Connection details for single/double shielded cables.
Probe positioning and care for insertion sensors.
Dimensions and features of the MUT1222 model.
Periodic checks for fixing nuts.
Ensuring proper earth connections and terminals.
Procedure for returning devices for service.
To Next Page
