EasyManua.ls Logo

Euronda E9 MED - Service Manual

Default Icon
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Steam Sterilizer
E9 INSPECTION
E9 RECORDER
E9 MED
s e r v i c e m a n u a l
ENGLISH
0051

Table of Contents

Questions and Answers

  • C
    Christina DeanAug 6, 2025
    What to do if there is a blackout with my Euronda Laboratory Equipment?
    • C
      Carly LoweAug 7, 2025
      In the event of a blackout with your Euronda Laboratory Equipment, first, wait for the mains voltage to return. Then, turn the unit back on using the main switch, ensuring the main switch is in the ON position.
  • P
    petersonandrewAug 22, 2025
    Why is there a voltage drop in my Euronda E9 MED?
    • C
      Chloe SmithAug 22, 2025
      If you experience a voltage drop with your Euronda Laboratory Equipment, the suggested solution is to check the voltage level, as the cause may be a sudden drop in mains voltage of ±10%.

Summary

1 - Introduction

1.1 General Precautions

Essential safety guidelines and warnings before performing maintenance operations.

2 - Safety

2.1 General Safety Warnings

Crucial safety precautions for operating the unit to prevent accidents and damage.

2.2 Safety Devices

Details electrical, thermal, and mechanical safety devices and their functions.

3 - Technical Data

3.2 Technical Data and Noise

Lists technical specifications, operating conditions, and noise levels.

4 - Installation

4.2 Installing the Unit

Details the installation process and the need for specialized technicians.

4.4 Performing the Vacuum Test

Instructions for performing the vacuum test, including timing and temperature conditions.

4.5 Performing the B134 Cycle

Steps for starting and running the B134 sterilization cycle.

5 - Description of Cycle and Main Performance Data

5.2 Cycle for E9 Inspection with Separator Draining Pump

Overview of the sterilization cycle phases for E9 Inspection with a draining pump.

5.3 Cycle for E9 Inspection;Recorder with Circuit U-234

Describes the sterilization cycle for E9 Inspection/Recorder with U-234 circuit.

5.4 Cycle for E9 MED (up to EGO090100 18 L and up to EGP090080 24 L)

Describes the sterilization cycle for early E9 MED units.

5.5 Cycle for E9 MED (since EGO090101 18 L and since EGP090081 24 L)

Describes sterilization cycles for later E9 MED models.

6 - Description of Test and Main Performance Data

6.1 Graph of Complete Vacuum Test

Visual representation of the complete vacuum test and its purpose.

6.2 Bowie&Dick Test

Explains the Bowie&Dick test for sterilization of porous loads.

6.3 Helix Test

Describes the Helix test for sterilizing hollow loads and related warnings.

7 - Maintenance

7.1 Safety Warnings

Crucial safety warnings and precautions for performing maintenance operations.

7.2 Periodic Maintenance

Schedule and procedures for routine maintenance, counter deactivation, and service.

7.4 Technical Menu

Accessing and navigating the technical menu for diagnostics, settings, and component tests.

8 - Components and Diagrams

8.1 Wiring Diagram

Provides the electrical wiring diagram for the unit.

8.2 Hydraulic Diagram

Presents the hydraulic diagrams for the unit and its specific circuits.

11 - Troubleshooting

11.1 Summary of Alarm Signals

Overview and details of all alarm signals, their phases, reasons, and actions.

Euronda E9 MED Specifications

General IconGeneral
BrandEuronda
ModelE9 MED
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals