Need help?Do you have a question about the Euronda Eurosafe 60 and is the answer not in the manual?
Defines the machine's permitted use and prohibits any other application.
General and specific standards for safe operation, operator responsibilities, and prohibitions.
Guidelines for machine installation, operation, chemical handling, and warnings about heat and water.
Identifies residual risks during various phases like loading, chemical handling, and maintenance.
Preparations required before installing the machine, including site requirements.
Instructions and regulations for connecting the machine to the water supply.
Guidelines for qualified personnel to connect the machine to the electrical mains.
Details the dosing system and connections for chemical products.
Pre-operation checks including chemical additives and safety gear.
Instructions on preparing items for washing, loading, and checking.
Describes the function of each button on the control panel (START, STOP, P1, P2, P3, PRG, USB).
Lists available pre-programmed cycles suitable for different soil levels.
Safety instructions for machine operators and maintenance technicians.
Procedure for calibrating the timed chemical dosing system.
Procedure for calibrating the chemical dosing system using flowmeters.
Details how alarms and warnings are displayed and lists possible alarm messages.
General guidelines and safety for maintenance personnel.
Lists common machine issues with their causes and recommended solutions.
To Next Page
General