FUNCTIONS
Ionizer:
To start or stop the Ionizer Function, press the IONIZER Button on the control panel. The indicator light
above the Ionizer icon " " will illuminate when the function is on. When turned on, the fan will release
negative ions into the air, which are attracted to and bond with positively- charged particles such as dust,
smoke, and other pollutants. Once bonded, these particles become heavier and fall harmlessly to the
ground, making the resulting air cleaner and fresher.
Timer:
To set the Timer Function, press the TIMER Button " " on the control panel repeatedly until the desired
time (up to seven hours) on the " ", " ", or " " indicator(s) appears. For example, to set the timer for
three hours, press the Timer button until the indicators above both " " and " " appear. The fan will turn
off after the set time has elapsed.
Breeze Mode:
To start or stop Breeze Mode, press the BREEZE button on the control panel. The indicator light above the
Breeze icon will illuminate when the function is on. Airflow will alternate among all speeds, including
"OFF".
Remote Control Operation:
The Remote Control can control the same functions as the buttons on the control panel. Press the
appropriate button on the remote to activate/change the desired function in the same manner as described
in the "Basic Operation" and "Fan Options" sections.
Remote Control Storage
Store the Remote Control behind the Control Panel, if desired.
To Next Page
Loading...
Need help?
General
