Need help?Do you have a question about the Eurosystems La Zappa and is the answer not in the manual?
General| Brand | Eurosystems |
|---|---|
| Model | La Zappa |
| Category | Tiller |
| Language | English |
Overview of product testing, reliability, and use of original spare parts.
Location of machine data and serial number decal on the frame cover.
Use caution for potential danger, follow instructions, and be aware of operator responsibility.
Warnings regarding user familiarity, alcohol/drugs, operator number, stones, and cable check.
Assemble spur and transport wheel support; transport wheel for moving only.
Assemble handlebar support, guide cable, and fix handlebars with screws and washers.
Adjust handlebar height by loosening and re-tightening support screws.
Attach the switch using plastic pins and self-tapping screws.
Steps to start the tiller: plug in, guide wire, press switch, pull lever, lift spur, touch ground.
Procedure to remove rotavators: unscrew nut, remove screw, slip out, clean and grease shaft.
Change oil every 60 hours by loosening cap, draining, and refilling with fresh oil.
Details on engine, transmission, working width, speed, and safety device.
Measured sound pressure, sound power, and handlebar vibration levels.
Information on available accessories like rotavators, de-thatcher, aerator, and ridging plough.
Check tiller plug, power cable plug, and power cable for damage.
Verify that the rotavators are securely tightened to the tines shaft.
Remove foreign bodies, check tines for damage, and clean the rotavator.
To Next Page
