Need help?Do you have a question about the Eurosystems Z3 and is the answer not in the manual?
General| Brand | Eurosystems |
|---|---|
| Model | Z3 |
| Category | Lawn and Garden Equipment |
| Language | English |
Details on the machine's tag plate and serial number for technical service.
Specifies the intended use of the motor-hoe and prohibits any other applications.
Essential safety guidelines to be followed before assembly and operation.
Explanation of accident-prevention devices and automatic drive disconnection.
Guidance on starting hoeing and applications like ground preparation and weeding.
Step-by-step instructions for assembling the motor cultivator, including fitting the drewbar and handlebar support.
Instructions for fixing and adjusting handlebars for optimal working height and side adjustment.
Details on throttle assembly and fitting the belt tightener control cable for forward/reverse gears.
Guidance on setting controls, adjusting drewbar height, and ensuring correct hoeing operation.
Crucial checks before starting the engine, including oil, fuel, air filter, and initial start-up procedure.
Instructions for operating forward and reverse gears and stopping the motor.
Covers oil changes, cleaning tiller parts, engine maintenance, and proper garaging practices.
Identifies and describes key components like control levers, cutters, and plant protection discs.
Details specifications for Motor Hoe models Z2 and Z3, including working width, weight, and dimensions.
Reports measured sound power and handlebar vibration levels according to EN 709 and ISO 5349 standards.
Lists optional accessories for Motor Hoe models Z2 and Z3, such as ridgers and weeders.
Provides solutions for common faults like engine not starting or tines not rotating.
To Next Page
