• To clean the steel tank, do not use abrasive detergents or objects; instead, use a lightly soaped
damp cloth.
• Do not use pressurised water jets as these may damage the electrical system.
5.3
eekly Maintenance
• Perform routine maintenance.
• Remove and clean the wash and rinse arms and nozzles.
Illustrated below are the possible configurations of upper and lower wash/rinse arms.
(*) Spray closed. Nozzle not present.
• Clean the arm rotation pins and the wash and rinse water
outlet zone.
• Carefully clean the tank and machine, using non-abrasive
disinfectant products.
• Correctly refit the nozzles, arms and filters, paying attention to
the inclination and coupling of the arms in their respective
seats.
To Next Page
Loading...