What to do if the compressor is running but the fan is not working on my EvaKool INFINITY Cooling boxes?
If the compressor is running but the fan isn't on your EvaKool Cooling box, it could be due to a faulty fan, which would need to be replaced. Alternatively, there could be an issue with the electronic box.
What to do if the compressor and fan are running on my EvaKool INFINITY Cooling boxes?
If the compressor and fan are running on your EvaKool Cooling box, ensure that the vents and condenser are not blocked, allowing for clear airflow through the unit. Clean the condenser and vents using a brush, vacuum, or compressed air, being careful not to flatten the fins. If the issue persists, it could indicate a gas problem, and you should contact EvaKool or a service agent.
How to fix a display that is not lit on EvaKool INFINITY?
If the display on your EvaKool Cooling box is not lit, try using a different power source, such as a vehicle or a 240-volt adapter. If this resolves the issue, the original power source may be the problem. Alternatively, check for loose wires on the top display circuit board or the bottom circuit board.
What causes the fan to run without the compressor on EvaKool Cooling boxes?
If the fan is running but the compressor isn't and there's no Fault LED on your EvaKool Cooling box, it could be due to a faulty yellow Fault LED or an issue with the electronic box.
General| Brand | EvaKool |
|---|---|
| Model | INFINITY Series |
| Category | Cooling boxes |
| Language | English |
Diagrams illustrating correct and incorrect DC power connections for the fridge.
Instructions for connecting the fridge to a 240V mains power supply via an adapter.
Steps for operating the fridge using a 12V power source, including plug insertion and control panel use.
Guidance on operating the unit from a 240V mains supply using an approved adaptor.
Key safety and operational advice, including placement, securing during travel, and battery management.
Explanation of how to use the internal divider for single or dual zone operation.
Overview of the fridge's construction and features like insulation, hinges, and cooling tunnel.
Recommended temperature settings for dual-zone and single-zone fridge operation.
Details on the three operating speeds (High, Medium, Low) and their use cases.
Explanation of the control panel buttons, indicators, and their functions.
Information on the power inlet connection and the function/resetting of the 15 amp circuit breaker.
Tips for maximizing efficiency, including pre-chilling, filling, and air circulation.
Step-by-step guide on how to safely defrost and clean the fridge.
Recommendations for storing the unit long-term to prevent mould and odours.
Instructions for cleaning the condenser coils to ensure efficient operation and prevent overheating.
Simple checks to identify if the fridge or the power source is faulty.
Explanation of voltage drop issues and recommended wiring specifications.
Detailed troubleshooting steps and solutions for the 'Not Cooling' problem.
Information on the product warranty period, coverage, and claim procedures.
Conditions and actions that may void the warranty, including misuse and modifications.
To Next Page
