EasyManua.ls Logo

EvaKool MAXI TRAC MT-45 - User Manual

EvaKool MAXI TRAC MT-45
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
POWERED BY
INSTRUCTION
MANUAL
FOR MODELS
MT-45 / MT-60 / MT075-DX

Table of Contents

Questions and Answers

  • D
    Dr. Rachael Walker MDAug 13, 2025
    Why does my EvaKool MAXI TRAC MT-45 Freezer show a LOW VOLTAGE ERROR?
    • J
      Joseph HarrisAug 13, 2025
      If your EvaKool Freezer displays a LOW VOLTAGE ERROR, it could be due to several reasons. First, the battery might be flat; use a multimeter to check the voltage (12.70V indicates 100% charge, 12.05V is 50%, and 10.50V means 0%). Also, inspect the supply lead for any breaks or fraying. Ensure the supply wiring is the correct size, referring to the cable sizing chart. To rule out a fridge fault, try running it on a different power source, such as a 240 Volt supply or a different vehicle or battery.
  • M
    Melissa NortonAug 16, 2025
    What to do if my EvaKool Freezer displays an OVER TEMPERATURE ERROR?
    • C
      Craig HigginsAug 16, 2025
      An OVER TEMPERATURE ERROR on your EvaKool Freezer can occur if the ambient temperature is too high; try moving the freezer to a cooler area. Another cause might be a blocked or dirty condenser, so clean and re-test it. If these steps don't resolve the issue, it could be due to a fan malfunction, in which case you should contact Evakool.
  • C
    charlessawyerAug 20, 2025
    What causes a MINIMUM MOTOR SPEED ERROR on my EvaKool MAXI TRAC MT-45?
    • W
      walkernicoleAug 20, 2025
      A MINIMUM MOTOR SPEED ERROR on your EvaKool Freezer indicates that the motor cannot maintain the minimum speed, approximately 1,850 rpm. This can be due to a heavily loaded refrigeration system or very high ambient temperatures; try moving the freezer to a cooler area. It could also be caused by a blocked or dirty condenser; clean and re-test. If the fan is not working, contact Evakool.
  • C
    Caitlyn SmithAug 25, 2025
    How to fix an EvaKool Freezer that is not running and has no LED display?
    • A
      audrey51Aug 25, 2025
      If your EvaKool Freezer isn't running and the LED display is off, it could be due to a lack of power to the unit. Try it on both 12V DC and 240 AC. There might be a faulty lead, so try a different power supply. Also, check the circuit breaker or fuse. If these steps don't work, it may be due to a faulty electronic component, in which case you should contact Evakool.
  • K
    Katherine OrtegaAug 28, 2025
    What does COMPRESSOR START ERROR mean on my EvaKool MAXI TRAC MT-45 Freezer?
    • E
      Emily JohnstonAug 28, 2025
      A COMPRESSOR START ERROR on your EvaKool Freezer may be caused by the unit stopping and starting too quickly, not giving the system time to equalize. Disconnect the power for ten minutes, then restart. If the problem continues, contact Evakool. Other potential causes include an electronic box issue or a faulty compressor.
  • B
    Barbara RossSep 1, 2025
    What does it mean when the fault light is flashing on my EvaKool MAXI TRAC MT-45 Freezer?
    • A
      Anna RodriguezSep 1, 2025
      The fault light flashing on your EvaKool Freezer indicates that the unit's built-in fault-finding system has detected an issue. The number of flashes per 5 flashes indicates the specific problem. Refer to the chart below to diagnose the fault.
  • W
    William HallSep 4, 2025
    What does FAN ERROR mean on my EvaKool Freezer?
    • A
      Anthony OrtizSep 4, 2025
      A FAN ERROR on your EvaKool Freezer indicates that the condenser fan is drawing too many amps (over 1-amp peak). This requires a replacement fan, so contact Evakool.
  • J
    james35Sep 8, 2025
    What to do if my EvaKool MAXI TRAC MT-45 displays error codes ER1 ER2?
    • W
      whitakerbenjaminSep 8, 2025
      If your EvaKool Freezer's LED display shows error codes ER1 or ER2, this indicates a thermistor issue. Contact Evakool for assistance.

Summary

Safety Instructions

Operating Instructions

Initial Start Up

Guide to preparing the unit for first use, including pre-checks and connection.

Control Panel

Explanation of the unit's control panel functions, buttons, and LED displays.

Energy Saving Tips

Defrosting & Cleaning

APP Control

Troubleshooting Guide

Technical Data

Dimensions and Parts

Detailed physical dimensions for MT45 and an overview of unit parts.

Product Features

Warranty Information

EvaKool MAXI TRAC MT-45 Specifications

General IconGeneral
ModelMAXI TRAC MT-45
TypePortable Freezer
Capacity45 Liters
CoolingCompressor
ColorGrey
Power Source12/24V DC & 240V AC
Temperature Range-18°C to 10°C
Lid TypeHinged

Related product manuals