Need help?Do you have a question about the Evantair CH-06 and is the answer not in the manual?
Guidelines for safe electrical connections, voltage, circuit usage, and power cord care to prevent hazards.
Specifies where and how the heater should be used, including limitations and prohibited uses.
Covers safe operation practices, handling hot surfaces, maintenance, and storage to ensure user safety.
Identifies and describes the main components of the convection heater.
Lists the components included for assembling the heater, such as screws and wall plugs.
Instructions for safely unpacking the heater, checking for damage, and handling packaging materials.
Details on how to assemble the heater for freestanding use or wall mounting.
Step-by-step guide for attaching the stand feet for freestanding operation.
Instructions for securely mounting the heater to a wall, including required clearances and drilling.
Guidance on initial checks, location placement, and connecting the heater to power.
Explanation of how to select the heating power output (750W or 1500W) using the switches.
How to set and adjust the thermostat to regulate room temperature.
Steps to safely turn off the heater and disconnect from power.
Procedure for safely moving the heater after use, including cooling down.
Details on the automatic overheat protection feature and how to prevent overheating.
Basic steps to take if the heater fails to operate correctly before contacting support.
Instructions for regular cleaning and maintenance to ensure proper functioning and safety.
Guidance on how to store the heater properly when not in use.
Information on obtaining service for the heater and replacing damaged parts.
Key technical data including model, power, voltage, dimensions, and weight.
Details on the standards and certifications the appliance meets.
Guidelines for environmentally friendly disposal of the appliance at the end of its life.
To Next Page
General
