Need help?Do you have a question about the EVE Play and is the answer not in the manual?
General| Number of drivers | - |
|---|---|
| Built-in speaker(s) | No |
| Ethernet LAN | Yes |
| Apple docking compatibility | Not supported |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| AC adapter output current | 1.5 A |
| AC adapter output voltage | 5 V |
| Product color | Black, Silver |
| Cables included | RCA |
Weight and Dimensions| Depth | 126 mm |
|---|---|
| Width | 131 mm |
| Height | 26 mm |
Diagram and explanation of POWER, ETHERNET, DIGITAL OUTPUT, and ANALOG OUTPUT ports.
Connect Eve Play to the power adapter and then to the power supply.
Use the RCA cable or digital outputs to connect Eve Play to your stereo or receiver.
Download the Eve app from the App Store and add Eve Play.
Open the Eve app and tap 'Add Accessory' to guide through setup.
Eve Play ensures simultaneous and synchronized playback across AirPlay 2 output devices.
Activate Audio Sync in the Eve app for automatic calibration using the built-in microphone.
Do not cover the Eve Play microphone during audio calibration for optimal performance.
Details on Eve Play's commitment to privacy, including no cloud, registration, or tracking.
Information regarding FCC, IC, and CE compliance, including radio frequency regulations.
Press and hold the reset button for 10 seconds to perform a factory reset.
Keep your HomeKit setup code in a safe place for secure home addition.
To Next Page