EVELO Compass Quick Start Guide 2
Is your Compass fully assembled? Great! Let’s go over a few key items:
Step 1: You’ll need power! The battery charge port and on/off switch are at the back of the bike, on the
right hand side of the battery. We recommend fully charging your trike before your first operation:
Note that the “on/off” switch should be turned to the “on” position, with the
rocker switch pushed to the “o”. The “-” signifies that the battery is turned off.
When not in use for an extended period, we recommend turning off power at
the battery.
Step 2: Familiarize yourself with the controls.
Brakes: Your trike includes front and rear brake levers, equipped with cutoff switches. It’s
recommended to squeeze both brakes with equal power at the same time for
stopping. Your brakes also have a parking brake function. Squeeze the brake and
squeeze the small lever on the front of the brake to engage the parking brake. Do
the reverse to release it.
To Next Page
Loading...
