EasyManuals Logo

Evenflo Advanced 4306 User Manual

Evenflo Advanced 4306
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
21
1. Always clean each accessory before
using the appliance.
2. Wash perfectly the components
that will be sterilized.
3. Place bottle racket in the steamer
chamber.
4. Place the bowl and the bowl lid on
the base. Note: we only place the
bowl to avoid spillages of steam.
5. Add 200 ml of tap water in the
steamer chamber.
6. Place the baby bottle or
accessories on the bottle racket.
7. Place the sterilizer lid, check that
the vent is far from you.
8. Plug the appliance.
9. Press the “steam” button
repeatedly until 10 minutes is
displayed.
10. Press the “start” button to begin
the sterilizing cycle.
11. Once the sterilizing cycle is
completed, the machine will shut off.
12. Unplug the appliance.
13. Wait from 3 to 5 minutes before
to remove the components.
14. Take the sterilizer lid off, and
remove the bottles or accessories.
8. INSTRUCTIONS: STERILIZER
20
Water
needed
Heat Time
(±15 seg)
Final temperature
4 °C)
Milk
120 ml (4 oz)
150 ml (5 oz)
240 ml (8 oz)
270 ml (9 oz)
120 ml (4 oz)
150 ml (5 oz)
240 ml (8 oz)
270 ml (9 oz)
Initial
temperature
Room T (22 °C)
Room T (22 °C)
Room T (22 °C)
Room T (
22 °C)
Cold Milk (5 ºC)
Cold Milk (5 ºC)
Cold Milk (5 ºC)
Cold Milk (5 ºC)
23 ml
15 ml
22 ml
11 ml
28 ml
22 ml
27 ml
19 ml
3:40 min
2:40 min
3:50 min
2:50 min
4:50 min
3:50 min
4:50 min
4:40 min
37°C
37°C
37°C
37°C
37°C
37°C
37°C
37°C
1. Always clean each accessory before
using the appliance.
2. Place bottle racket, bottle holder
and adaptor ring, in the steamer as
the picture shows.
3. Add tap water in the steamer see
page 20.
4. Place the baby bottle or jar into the
bottle holder.
5. Plug the appliance.
6. Press the “bottle” button.
7. Press “start” button to turn on
heater. The Word “bottle” on LCD
screen will flash repeatedly while
heater is on.
8. When water is evaporated, the
appliance will turn off.
9. Unplug the bottle warmer from the
main supply.
10. Remove the bottle or jar from the
bottle warmer and stir or shake.
Always check the temperature of the
milk or food before feeding your baby.
7. INSTRUCTIONS: BOTTLE WARMER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Evenflo Advanced 4306 and is the answer not in the manual?

Evenflo Advanced 4306 Specifications

General IconGeneral
BrandEvenflo
ModelAdvanced 4306
CategoryFood Processor
LanguageEnglish